SHCV Check Valves
Print Page
SHCV2-S-6-1/3P
SHCV2-S-6-1/3P - Image 2
SHCV2-S-6-1/3P - Image 3

SHCV2-S-6-1/3P

SHCV 3/8 in. Tube Outside Diameter D, #1/3 psi Nominal Cracking Pressure Spring, 6000 psi Working Pressure Check Valve

Add any item to your quote and we’ll get back to you with a price. Discounts apply for larger quantities, so the more you need, the better the rate. We’ll always get you the best possible price based on your volume.
SKU: SHCV2-S-6-1/3P Category: Tag:
Click here for more info
Add to quote
Specifications
Back Pressure at 70 (20 ºC) Temperature 413bar, 6000psig
Cv Coefficient 1.8
End Size 44263mm
Inch/Metric Inch
Nominal Cracking Pressure 0.02bar, 1/3psig
Operating Pressure [Min] 413bar, 6000psig
Orifice 7.8mm
Reseal Pressure [Min] 0.41bar, 6psig
Temperature Rating for Ethylene Propylene -45 to 148ºC, -50 to 300ºF
Temperature Rating for Fluorocarbon (FKM) -23 to 190ºC, -10 to 375ºF
Temperature Rating for Nitrile Butadiene Rubber -23 to 121ºC, -10 to 250ºF
Dimensions
SHCV2-S-6-1/3P
Dimension A 69.9mm
Dimension B 31.2mm
Dimension h 1in, 25.4mm
Description

(SHCV2-S-6-1/3P)

Stainless Steel Check Valve – 3/8" Tube OD | 1/3 PSI Cracking Pressure | 6000 PSI Rated

The SHCV2-S-6-1/3P is a high-performance 3/8" check valve engineered for precise backflow prevention in pressure systems, clean gas lines, and hygienic fluid processors. With a cracking pressure of 1/3 psi and a working pressure up to 6000 psig, this valve delivers consistent shutoff performance and leak-tight sealing under demanding conditions.

● Material: 316 Stainless Steel Body, Brass Internals
● Connection Type: 3/8" Tube OD
● Cracking Pressure: 1/3 PSI
● Working Pressure: Up to 6000 PSIG
● Applications: Clean in place instrumentation, gas analyzers, sanitary skids, OEM fuel delivery, hygienic valves

This instrumentation-grade valve is equipped with a fluorocarbon (FKM) seal and supports system temperatures up to 375°F (190°C). Whether used in lab environments, analytical panels, or sanitary transfer systems, it integrates smoothly into any flow control application where corrosion-resistant alloys and ultra-low cracking pressure are essential.

The SHCV2-S-6-1/3P is also factory-tested for sealing integrity and precision. Comparable to a Swagelok check valve equivalent, it supports precise fluid control across sanitary stainless steel fittings and process piping setups.

Compatibility
This part may be used in place of the following parts from other manufacturers:
Swagelok® SS-CHS6-1/3
Back to SHCV Check Valves